Air Operated A 40 HVS 51


TRANSFLO™ Air Operated A 40 HVS 51 Pumps are designed for pumping light to highly viscous liquids. The progressing cavity design ensures smooth and non pulsating flow and ideal for the gentle transfer of viscous liquids.

Working Principle :

Pumping action starts the instant, the ROTOR turns. Liquid enters the pump suction under pressure as the ROTOR turns within the STATOR thus forming tightly sealed cavities which moves the liquid toward the Outlet. Liquid acts as lubricant between the rotor and stator.

Advantages of Motorised TRANSFLO™ Drum Pump :

Air Operated A 40 HVS 51

Air Operated A 40 HVS 51

  • Material of Construction in SS 316 / 304.
  • Maximum flow rate 60 Kgs / Minute. Consult Factory.
  • Max discharge pressure up to 12 Bar. Consult Factory.
  • Generates differential head up to 100 Mtrs for thin bodied liquids.
  • The flow rate is approximately proportioned to speed.
  • Pumping pressure does not depend upon the speed.
  • ROTORS are made of Stainless Steel 316 material.
  • STATORS are metal tubes with internally moulded synthetic rubber & available in Viton, Hypalan, Neoprene, EPDM, Buna –N.

Technical Specification :

MODEL MAX FLOW RATE MAX HEAD MOTOR DETAILS TOTAL WEIGHT TYPE OF DRIVE
SS PUMP WITH 51 MM DIA METERS STATOR
A 40 HVS51 A / 0.5 15 Kg / Min 6 Bar 0.5 HP / 15 CFM / 750 RPM 11 Kgs Air Driven
Note : Flow Rate & Head mentioned are based on Water as testing fluid at ambient conditions. Flow rate & Head varies as viscosity changes.

Drive Motors :

Air Motor is a radial piston type with in built air regulating valve. Air Inlet size – ½”. Air Motor automatically cools down due to expansion of compressed air. As sparking or fusing is not possible, Air Motor offers explosion protection without involving additional cost for safety precautions. Use of Air Filter Regulator and Lubricating Unit is recommended before / at the point of use of Air Motor.