Electrical Operated – Non Explosion Proof A 40 HVS51


TRANSFLO™ Electrical Operated A 40 HVS51 Pumps are designed for pumping light to highly viscous liquids. The progressing cavity design ensures smooth and non pulsating flow and ideal for the gentle transfer of viscous liquids.

Working Principle :

Pumping action starts the instant, the ROTOR turns. Liquid enters the pump suction under pressure as the ROTOR turns within the STATOR thus forming tightly sealed cavities which moves the liquid toward the Outlet. Liquid acts as lubricant between the rotor and stator.

Advantages of Motorised TRANSFLO™ Drum Pump :

Electrical Operated - Non Explosion Proof A 40 HVS51

Non Explosion Proof A 40 HVS51

  • Material of Construction in SS 316.
  • Maximum flow rate 40 Kgs / Minute.
  • Max discharge pressure up to 6 Bar.
  • Generates differential head up to 60 Mtrs for thin bodied liquids.
  • The flow rate is approximately proportioned to speed.
  • Pumping pressure does not depend upon the speed.
  • ROTORS are made of Stainless Steel 316 material.
  • STATORS are metal tubes with internally moulded synthetic rubber & available in Viton, Hypalan, Hi Nitrile, EPDM, Buna –N.

Technical Specification :

MODEL SPECIFICATION MAX FLOW RATE MAX HEAD ELECTRIC MOTOR DETAILS TOTAL WEIGHT TYPE OF DRIVE
SS PUMP WITH 51 MM DIAMETER STATOR
A 40 HVS51 E / 1.0 40 Kg / Min 6 Bar 1.0 HP / 3 Ph / 960 RPM 23 Kgs Electric
A 40 HVS51 E / 1.5 40 Kg / Min 6 Bar 1.5 HP / 3 Ph / 960 RPM 25 Kgs Electric
A 40 HVS51 E / 2.0 40 Kg / Min 6 Bar 2.0 HP / 3 Ph / 960 RPM 32 Kgs Electric
A 40 HVS51 E / 3.0 40 Kg / Min 6 Bar 3.0 HP / 3 Ph / 960 RPM 35 Kgs Electric
Note : Flow Rate & Head mentioned are based on Water as testing fluid at ambient conditions. Flow rate & Head varies as viscosity changes.

Drive Motors :

Electric Motors are TEFC type with ON - OFF switch & 5 Mtr Electric cord , continuous duty rated, 3 Phase.